Home - Security & Fire Protection - Fire door development for composite doors

Fire door development for composite doors

Liniar and Pyroplex join forces to creaste range that passes FD30 and standard requirements

A testing programme between Pyroplex and Liniar, working with some of the industry’s best component providers, has led to the development of a fire resisting solution for Liniar’s range of composite doors.

Pyroplex approached Liniar at the 2016 FIT Show to propose working together on a project to develop a fire door assembly capable of achieving a fire resistance period of 30 minutes.

When prospective customers The Fascia Place then approached Liniar to enquire if its range included fire doors, the project began to take shape. Liniar utilised The Fascia Place’s previous knowledge, working together to develop a successful fire door.

Pyroplex manufactures intumescent strips for use in doors and glazing systems. Its systems are supported by international testing and certification and they hold third party approval under internationally recognised schemes.

After completing a small-scale fire test, Pyroplex commissioned Exova Warringtonfire to undertake a full-scale fire test incorporating two doors, both of which included overhead glazing panels and glazed side lights with large aspect ratios, which can often fail under constant fire load.

Both of the door set assemblies achieved a significant overrun in terms of fire resistance. The test was continued to failure, exceeding the 30-minute requirement by more than 15 minutes – meaning the doors are well on the way to reaching the 60-minute mark.

Paul Garforth, Liniar technical support manager, commented: “The level of technical expertise and knowledge of Pyroplex and support from Distinction has been the key to the success of this testing programme.

“We’re delighted that both door sets not only achieved FD30 status, but surpassed the standard required.

“The test proves the compatibility and function of Liniar sections are a perfect combination with Pryoplex’s intumescent seals and Distinction slabs.

“The newly written fabrication manual, along with the Exova assessment report, will be available to customers who are thinking about supplying FD30 products themselves.”